My Articles

#
Nov 23, 2011, 2:15 PM
As it is my quest to improve upon the stock production car, one of the areas that is often overlooked is the strut rods.
#
Nov 13, 2011, 11:34 PM
After forty plus years, your guides are probably as hard as the metal it has been sticking to.... Solution: Replace that stuff!
#
Nov 13, 2011, 3:35 PM
The instructions that come with the disc brake kit for the 66 Mustang are pretty easy to follow. They walk you through taking your old stuff off and the reassembly. Lucky for this project, it's like starting from scratch so the only thing I had to do was have the spindles checked for wear and then get them to the Powder Coater…